Kit retrofit Kone

5HK-300

Fastest solution for installation upgrading

MADE IN ITALY

  • Plug & Play
  • Expandible over GSM line with the universal gateways
  • Programmable via SD-Card e SW e-stant
  • To be installed on the lift car-top

The Retrofit Kit is designed to keep the KONE installation’ functions in the fastest and easier way, and allows to replace the KRM Kone system and to use the existing emergency pushbutton and LEDs. The Retrofit kit can also be used with KCEAPM and KONEXION systems.

The system consists of:

  • autodialler Helpy 2W-V
  • kit cavi precablato specifico per impianti Kone.

The Retrofit Kit is designed to keep the KONE installation’ functions in the fastest and easier way, and allows to connect additional 2W speaker units. Ready for connection over the PSTN line, expandible over GSM line.

  • Alarm calls and periodic test calls management as per EN81-28:2022
  • Telephone numbers: programmable, up to 12
  • Supported voice terminals: up to 8 add-on speaking units (32 with auxiliary BUS power supply)
  • Car-top and bottom pushbuttons management
  • Digital volume adjustment
  • Advanced self-diagnosis system
  • Programming modes: local or remote via phone, SMS, PC with e-stant software and USB cable, micro SD Card
  • VoIP compatibility: with analog output or ATA adapter
  • Alarm sending modes: voice, CLI, SMS, esse-ti protocol, P100
  • Voice prompts: menu with 8 languages, customizable with e-stant software
  • Alarm ending: with or without entering codes
  • Relay: programmable, multifunction
  • Technological alarms: absence of 2W handsfree terminal connection, low battery, battery replacement, power supply failure, diagnostics, auxiliary
  • Multi-link function: up to 9 autodiallers can be connected over 1 telephone line
  • SD Card: extended LOG, firmware update, messages and programming.

2W speaker unit
5HV-300

2W speaker unit

The 2W speaker unit is an independent digital speech unit designed for installation behind the lift car panel.

The 2W digital-technology speaker units allows two-way communication with excellent audio quality and low consumptions.

The wide range of size and fittings combines functionality and versability in order to meet any installation requirement.

Quick and easy-to-instal with only 2 wires, the speech units allows to combine 2W and passive speaker units.

The brand-new 2W speaker units are equipped with advanced self-diagnosis system to check constantly the system.

2W speaker unit with pushbutton
5HV-302

2W speaker unit with pushbutton

The 2W speaker unit with pushbutton is an independent digital speech unit designed for installation on the elevator car-top or in the pit.

The 2W digital-technology speaker units allows two-way communication with excellent audio quality and low consumptions.

The wide range of size and fittings combines functionality and versability in order to meet any installation requirement.

Quick and easy-to-install with only 2 wires, the speech units allows to combine active and passive speaker units.

The brand-new 2W speaker units are equipped with advanced self-diagnosis system to check constantly the system.

Induction Loop (5HV-153)

Induction Loop (5HV-153)

Communication aid device for hearing-impared, compatible with autodiallers equipped with specific audio input. Backlit pictogram to indicate activation, embedded microphone and excellent audio quality. Comes with inductive wire.

GSM500 – GD
5IG-161

GSM500 – GD

Universal GSM gateways compatible with any alarm system.

GSM500 – GD is a device that, connected to a fixed telephone or to the PSTN input terminals of a PABX or autodialer, allows you to make and receive calls over the GSM network. For correct operation, a GSM SIM card is required.

Different versions are available:

5IG-160 GSM500 BASIC: comes with magnet-base antenna and extension cable (L= 2 m)

5IG-161 GSM500 – GD: comes with magnet-base antenna and extension cable (L= 2 m), built-in backup batteries and external adapter.

500 details

4G.VoLTE
5IG-260

4G.VoLTE

4G.VoLTE is the universal 4G LTE/UMTS/GPRS/GSM gateway, for voice transmission over LTE with fallback on 3G/2G network.

The 4G.VoLTE is a device that, connected to a fixed telephone or to the PSTN input terminals of a PABX or autodialer, allows you to make and receive calls over the 4G LTE/UMTS/GSM networks.

VoLTE means Voice over LTE, the fourth generation net for Internet access, delivering calls over 4G by means of the IP Multimedia Subsystem (IMS) architecture, in order to reach the utmost speech quality thanks to the superior bandwidth used for conversation, offering the most innovative and long-lasting service.

The 4G.VoLTE module comes with:

  •  back-up batteries,
  • adapter,
  • magnet-base antenna and cable L= 2 m.

Available the specific version for:

  • Australia: part number 5IG-251
  • North America: part number 5IG-257
  • Latin America: part number 5IG-268
4G.VoLTE SWITCH
5IG-260

4G.VoLTE SWITCH

4G.VoLTE is the universal 4G LTE/UMTS/GPRS/GSM gateway, for voice transmission over LTE, with the special INTERCOM function for communication and programming of the connected autodialler.

The 4G.VoLTE SWITCH module comes with:

  • back-up batteries,
  • relay output for local or remote activation vis SMS,
  • input for intercom function,
  • magnet-base antenna
  • telephone connection cable L = 2 m.
Scroll to Top