4G Router
4G Router is a device that, connected to a fixed telephone or to the PSTN input terminals of a PABX or autodialer, allows you to make and receive calls over the 4G LTE/UMTS/GSM network.
4GRouter comes with built-in backup batteries and 2 relays output which can be activated either locally or remotely via SMS.It also has the following features:
- LAN/Wireless access point to offer Wi-Fi/cabled connectivity to connected devices
- Dynamic DNS client to allow the user to remotely access (using the public Internet) the router itself and all the devices connected to it
- Data transmission through standard RS-232/RS-485/CAN-bus.
For correct operation the SIM card must be enabled for voice and data traffic.
pn:
5IG-600
Services
- Easy localization of remote devices with no public IP (communication via socket TCP between 2 clients managed by the server COMNet)
- Allows the remote diagnostic and the remote maintenance service
- The connection can be activated both client and gateway sides
- It sends automatically notifications in case of failures or emergency
- Remote programming via SMS
- Reading of programming codes via SMS
- Automatic country setting and roaming service
- Battery check
- External power failure control
- Relay-based notification of external power failure
- Relay-based notification of 4G LTE/UMTS/GSM network loss
- SMS notifications (low-battery, dead battery, replaced battery,external power failure/restore, 4G LTE/UMTS/GSM network restore)
- Measurement of 4G LTE/UMTS/GSM signal level
- Remote reboot function
- Access point wireless
- Dynamic DNS client
- Data transmission through standard RS-232, RS-485 and CAN-bus
Hardware and Software design
and development carried out
at the Esse-ti Research Center.
100% made in Italy.
TECHNICAL FEATURES
- Device status indicator LED
- Data transmission indicator LED
- Power supply status indicator LED
- 4G LTE/UMTS/GSM signal indicator LED
- Line status indicator LED
- 4G LTE/UMTS/GSM module
- Wi-Fi: supports150Mb/s @ 2.4Ghz WiFi, standard 802.11 b/g/n
- SIM card slot (2FF)
- 230 Vac external adapter input
- NiMH 800 mAh 7,2 V back up battery
- 11-26 Vdc power supply input
- 2 Relay outputs
- Terminal blocks for data transmission
- Micro USB A/B port for pc connection
- External antenna (cable length = 2 m)
- Diversity antenna in LTE reception via additional antenna (cable length = 2 m)
- External Wi-Fi antenna
- External adapter (230 Vac 50 Hz input; 12 Vdc 500 mA output; CE mark)
